This product is refined from a variety of efficient, safe, and environmentally friendly high-quality raw and auxiliary materials, with excellent cleaning capabilities such as oil removal and degreasing. It is an upgraded product of ES-401, characterized by lower odor, higher flash point, faster volatilization, and safer and more environmentally friendly use.

a) Economy: This product is solvent based and cannot be diluted, but can be reused.

b) Efficiency: It can quickly penetrate into the interior of fats and oil stains, dissolve and cause them to fall off, and dry quickly, with simple and convenient operation.

c) Safety: No corrosion to metal materials such as steel, copper, aluminum, titanium, etc., and good compatibility with most organic materials such as synthetic rubber and plastic.

d) Environmental friendliness: It does not contain prohibited substances and is an environmentally friendly cleaning agent product.

Method of using：

a) Scrubbing and brushing methods: You can use a cloth dipped in this product to scrub or brush with a brush. After cleaning the workpiece, it can be blown dry or naturally air dried.

b) Spray cleaning method: A dedicated spray gun can be used to spray clean metal components. For stubborn dirt, first wet it with this product and then spray clean it. For motors and bearings, they should be refilled with lubricating oil after cleaning and drying.

c) Ultrasonic cleaning method: Light oil stains can be cleaned once in an ultrasonic cleaning tank and naturally air dried; For workpieces with heavy oil stains and high cleanliness requirements, they can be cleaned in the first ultrasonic tank and then rinsed in the second tank. After cleaning, they can be blown dry or naturally air dried.

Notes：

a) Do not use near an open flame, store in a ventilated area below 40 ℃.

b) Please do not touch the skin for a long time or inhale a large amount of volatile gases. If accidentally splashed into the eyes, please rinse with water in a timely manner.

c) Ultrasonic cleaning must use ultrasonic equipment with specialized solvent cleaning agents, and conventional (usually water-based cleaning agents) ultrasonic cleaning machines cannot be used.