This product is refined from a variety of efficient, safe, and environmentally friendly high-quality raw and auxiliary materials. It has excellent cleaning capabilities such as oil removal and degreasing, making it an ideal substitute for ODS cleaning agents.

1. It can penetrate into the interior of oil and other dirt, quickly dissolve and cause it to fall off.

2. Excellent cleaning effect, fast drying, simple and convenient operation.

3. pairs of metal materials such as steel, copper, aluminum, and titanium are non corrosive, and have good compatibility with most organic materials such as synthetic rubber and plastic.

4. It does not contain prohibited substances or ODS controlled substances, and is safe for human health and the environment.

Method of using：

1、Scrubbing and brushing method: the product can be dipped with a rag or brushed with a brush. After the workpiece is cleaned, it can be dried by blowing or natural air.

2、Spray washing method: a special spray gun can be used to spray wash metal parts. For stubborn dirt, first wet it with this product, and then spray wash it. For motors and bearings, refill lubricating oil after cleaning and drying.

3、Ultrasonic cleaning method: light oil dirt can be cleaned in the ultrasonic cleaning tank and dried naturally; Workpieces with heavy oil stains and high cleanliness requirements can be rinsed in the second tank after cleaning in the first tank of ultrasonic wave, and then dried by blowing or natural air after cleaning.

Notes：

1.Do not use near open fire, store in a ventilated place below 40℃.
2.Do not touch the skin for a long time and inhale a large amount of volatile gas. If it splashes into your eyes, please wash it with water in time.

3.Ultrasonic cleaning must use ultrasonic equipment with special solvent cleaning agent, and conventional (generally water-based cleaning agent) ultrasonic cleaning machine cannot be used.