This product is refined from a variety of efficient, safe, and environmentally friendly high-quality raw and auxiliary materials, and does not contain ODS controlled substances such as carbon tetrachloride, trichloroethylene, trichloroethane, CFC-113, etc. It is an ideal substitute for ODS cleaning agents.

Product Characteristics

1 pair of copper, steel, aluminum, gold, silver, titanium and other metal materials are non corrosive, and have excellent compatibility with most organic materials such as synthetic rubber and plastic.

2. It is volatile, non-toxic, and has strong solubility. It has excellent degreasing and degreasing ability, and can clean the residual flux of PCB after welding.

3. No harm to human body, safe for the environment.

Method of using：

1. Manual brushing: Soaking or brushing can be used. If the cleanliness requirement is high, ES-334 can be used for rinsing (the cleaning agent after rinsing can be recycled), and then blown dry or naturally air dried before proceeding to the next process.

2. Ultrasonic cleaning: According to the process conditions determined by the experiment, use ultrasonic cleaning. Then blow dry or naturally air dry, and proceed to the next process

Notes：

1. It is recommended to clean and then weld some components that are not solvent resistant.

2. The use environment should be well ventilated and must be kept away from open flames.

3. Avoid prolonged contact with the skin or inhalation of large amounts of volatile gases. If accidentally splashed into the eyes, please rinse with water in a timely manner.

4. Store in a sealed and ventilated place, avoiding contact with high-temperature heat sources and avoiding direct sunlight exposure.

5. If heating is necessary, safety precautions must be taken.