This product is refined from a variety of efficient, safe, and environmentally friendly high-quality raw and auxiliary materials, mainly used to remove paint, oil, and resin films from metal surfaces.

1.The film layer that can quickly penetrate the metal surface can be peeled off in just 5-30 minutes.

2. It does not contain acid, does not corrode metals, and does not damage the surface finish of the substrate.

3. Non flammable, easy to operate, and safe to use in various situations.

Method of using

1. Soaking and film removal method: After containing this product in an iron container, soak the workpiece to be removed from the film. After soaking for 5-30 minutes, the film layer will expand, become soft, and fall off automatically.

2. Two pairs of multi-layer stubborn coatings can repeat the above process, apply certain external forces, or use ultrasonic equipment.

Notes

1. The usage environment should have good ventilation conditions and must be kept away from open flames.

2. This product has a stimulating effect on the skin, and it should be avoided as much as possible when using it; Wear solvent resistant gloves when necessary.

3. If accidentally splashed into the eyes, please rinse immediately with water.

4. Store in a sealed and ventilated place, avoiding contact with high-temperature heat sources and avoiding direct sunlight exposure.